Tasks
Configuration
To set up an environment as illustrated in Figure 5-2 the following installation and configuration steps are required:
System A
Perform the following steps to install and configure System A.
1. Configure a supported Web server.
2. Configure the WAS Plug-in for the Web server. System B
Perform the following steps to install and configure System B.
1. Install WAS V7.0
2. Create an appserver profile using the following profile template:
APP_ROOT/profileTemplates/default
3. Create a Web server definition through the Integrated Solutions Console or through the wsadmin scripting interface.
The Web server definition is used by the appserver to generate the plug-in configuration file. In a stand-alone topology, only one Web server can be defined to the configuration and it must be an unmanaged Web server.